Standards:

• Internationals:EN 50525-2-31;HD21.3;IEC 60227-1
• Nationals:NF C 32-201/3

Description / Usage

They can be: Green, Yellow, Red, Brown, Black, Blue or Mixed and according to customer order. these conductors are without sheath, PVC insulated, for general use.

H07V-U conductors are intended for the equipment of domestic installations, housing, offices, etc.They are specially designed for wiring boards.They are suitable for fixed and protected installations, in lighting and control devices for voltages less than or equal to 1000V ac and less than or equal to 750V DC to earth.

Characteristics:

• Core nature : Bare copper
• Core Flexibility: Massive class 1
• Insulation: PVC
• Rated operating voltage Uo / U (Um): 450/750 V
• Mechanical resistance to impact: Low
• Maximum temperature on the core: 70 ° C
• Non- flame propagating: C2, NF C 32-070 & IEC 60332-1

Installation

Free air, on insulator support, under molding, tube, sheath, plinth …, in dry rooms. Thanks to the slippery properties of the insulation, H07V-U is designed to facilitate the implementation during the pulling

Normes:

• Internationals:EN 50525-231;HD21.3;IEC 60227-1
• Nationals:NF C 32-201/3

Description / Usage:

Conductors without sheath, PVC insulated, for general use.The H07V-R conductors are intended for the equipment of domestic installations, housing, offices. They are more specifically intended for wiring boards.

They are suitable for fixed and protected installations, in lighting and control devices for voltages up to 1000V AC or up to 750V DC to ground.

Charcteristics:

• Core nature: Bare copper
• Core Flexibility: Massive class 2
• Insulation: PVC
• Rated operating voltage Uo / U (Um): 450/750 V
• Mechanical resistance to impact: Low
• Maximum temperature on the core: 70 ° C
• Non- flame propagating: C2, NF C 32-070 & IEC 60332-1

Installation:

In the open air, on insulator support, under molding, tube, sheath, plinth, … in dry rooms. Intensity values are given for insulated conductors laid in a duct in installation apparent or recessed into a wall, for an ambient temperature of 30 ° C in a steady state. If the conditions are different, the correction factors of standard NF C 15-100 or equivalent national standard.

Standards:

• Internationals::  EN 50525-2-11; HD 21.5; IEC 60227-53
• Nationals:NF C 32-201/5

Description / Usage

They can be: Green, Yellow, Red, Brown, Black, Blue or Mixed and according to customer order.Flexible cables, insulated and sheathed in PVC, for domestic use. H05VV-F cables are intended for the supply of various electrical appliances, mobile or semi-mobile. Their use for supplying heating and cooking appliances is only possible if the cables are not exposed to radiation or in contact with hot parts.

Characteristics:

• Nature of the core: : bare core Unleaded
• Flexibility of the core: Flexible class 5
• Insulation: PVC
• Rated operating voltage Uo / U (Um): 300/500 V
• Mechanical resistance to impact : Low
• Maximum temperature on the core : 70°C
• Flame retardant : C2, NF C 32-070

Installation

Open air

Satandards:

• Internationals:EN 50525-231;HD21.3;IEC60227-1
• Nationals:NFC 32-201/3

Description / Usage

Flexible industrial cables are particularly suitable for the supply of mobile machinery, electrical tools, building sites. The use up to 0.6 / 1 kV is allowed in the case of fixed installations protected. These cables can be used in refrigeration plants.

Characteristics:

• Nature of the core: Annealed copper
• Sheath colour: Black
• Lead free: yes
• Insulation: PVC forming stuffing
• Rated operating voltage Uo / U (Um): 450/750 V
• Mechanical resistance to shocks: Very good.
• Flexible cable: flexible
• Maximum temperature on the core: 85 ° C
• Maximum temperature on the core in short circuit: 200 ° C

Installation

Ultraviolet-resistant cable designed to operate in the open air. In case it is buried, provide a mechanical protection (chute, gutter, etc.).