Wires and Halogen free installation cables

Description

For residential and industrial fixed installations, Everwell offers a range of halogen-free installation wires and cables with fire performance.

These wires and cables are intended for bundle or sheet installations and installations in locations with a particular fire risk (BE2 or BE3 or CA2 or CB2). In addition, these wires and cables are also suitable for locations with a longer evacuation time than normal (BD2, BD3 or BD4).

Standards:

  • Internationals:NBN HD 604 Part 5/Sect.

Description / Usage

They can be Green, Yellow, Red, Brown, Black, Blue or Mixed and according to customer order. Cca installation cables s1 d2 a1 for installations inside buildings with a high concentration of people or expensive equipment, especially if evacuation conditions are difficult (BD2, BD3 and BD4 according to RGIE).

Characteristics:

  • Nature of the core: Copper
  • Stuffing material: jam or belt
  • Insulation: XLPE
  • Rated operating voltage Uo / U (Um): 0.6 / 1 kV
  • Mechanical resistance to impact: 6J
  • Maximum temperature on the core: 90 ° C

Installation

  • In gutter
  • In cable trays
  • In surface or buried pipe, provided adequate drainage is provided
  • Sanded in concrete or cement or in the wall
  • In the open, protected from direct UV rays
  • For the industry
  • For homes

Permissible ambient temperature up to -15 ° C provided that there are no mechanical forces or movement

Câbles d'installation sans halogène
Câbles d'installation sans halogène

Standards:

  • Internationals: NBN C30-004

Description / Usage

They can be Green, Yellow, Red, Brown, Black, Blue or Mixed and according to customer order. Halogen-free, fire-resistant (F2) and fire-resistant cable up to 2 hours (Rf2h) for installation in buildings according to legal requirements.

Characteristics:

  • Nature of the core: Bare copper
  • Insulation: High mechanical resistance elastomer – INFIT ™ in accordance with standard NF C 32 102-1
  • Outer sheath: non-halogenated polyolefin.
  • Rated operating voltage Uo / U (Um): 0.6 / 1 kV
  • Fire resistant: CR1, NF C 32-070-3, IEC 60331-21, EN 1363, NBN C 30-004 FR2 Rf2h.
  • Non-propagating fire: C1, NF C 32-070-2, IEC 60332-3, EN 1363, NBN C 30-004 F2, SS 424 14 75 class F4A.
  • Low smoke generation: IEC 61034.
  • Ambient temperature range of use: -20 .. 60 ° C

Installation

Câbles NF C 33-210 avec Téléreport